Free UK DeliveryFinance at checkout30 Day ReturnsWorldwide DeliveryAudio Affair Facebook

Warehouse Clearance

Emotiva BasX A1 Mono Power Amplifier

 

. 0 Reviews . Write a Review

Enquiry/price check? Click here SKU: EMTBASXA1
Ex VAT: £457.50
£549.00

A1 is a fantastic value mono power amplifier (or monobloc), an ideal choice for using in multiples or with other Emotiva power amps in two channel and multi channel systems.

Available - Usually ships within 2-3 days

Condition: Brand new in original retail packaging

Earn 549 loyalty points when you order this item.

You can earn loyalty points on every order you place on this website. If you select to create an account at checkout, your loyalty points will be saved and you can use these to discount future orders online. 

 

Each product page shows you how many loyalty points you can earn when you order that item. Essentially, for each £1 you spend, you earn 1 loyalty point and for every 1 point earned, 1p will be added to your loyalty point balance (this is the same as some of the UK's biggest loyalty point cards). So for example, if you spend £500, you'll earn 500 loyalty points which can be used to discount a future order by £5.00. 

 

Read more

Get a trade in quote

To reduce the price of this item, we may be able to accept your old equipment as a trade in (part exchange).

Please send us your details along with details of the item(s) you'd like to trade in and we'll come back to you within 2 working days (but usually a little sooner) with a quote.

Send us a message now

Do you have any questions on this item you'd like us to answer? Or have you seen it cheaper elsewhere and would like us to see if we can beat it? Send us the details below and we'll come back to you quickly (usually within 24hrs, sooner during opening hours)

Product Video

Features

Warranty length 3 Years
Colour Black
Brand Emotiva

Tech Specs

- Power Output: 200 watts RMS; 20 Hz – 20 kHz; THD < 0.05%; into 8 Ohms. 325 watts RMS; 1 kHz; THD < 0.1%; into 4 Ohms.
- Power Bandwidth (at rated power; 4 Ohm - 8 Ohm load): 20 Hz to 20 kHz (+ / – 0.07 dB).
- Broad Band Frequency Response: 5 Hz to 80 kHz +0/-1.8 dB.
- THD + noise: < 0.02% (A-weighted); ref rated power.
- Signal to Noise Ratio (8 Ohm load):  > 112 dB; referenced to rated power; (A-weighted).
- Minimum Recommended Load Impedance (per channel): 4 Ohms  (which equals one 4 Ohm load or two paralleled 8 Ohm loads).
- Damping Factor (8 Ohm load): > 500.
- Input Sensitivity (for rated power; 8 Ohm load): 1.6 V.
- Gain: 29 dB.
- Input Impedance: 27 kOhms.
- Input And Output Connections
- Input Connection: Unbalanced (RCA).
- Speaker Output Connections: Audiophile grade 5-way binding posts.
- Trigger: Trigger Input: 5 – 12 V (AC or DC); <10 mA input current required. Trigger Output: 12 VDC; can drive any load up to 120 mA.
- Power Requirements
- 115 VAC or 230 VAC @ 50 / 60 Hz (automatically detected).
- Front Panel Controls and Indicators
- Standby: push button.
- Status LED: one; blue.
- Status LED: changes to red to indicate a fault condition.
- Standby LED: amber.
- Rear Panel Controls
- AC Power switch: rocker switch (switches AC main power).
- Status LED switch: disables front panel Status LED.
- Protection: The BasX A1 is protected against excessive operating temperature, shorted speaker connections, ground faults, and other common fault conditions.
- Dimensions:  17” wide x 4” high x 15-1/2” deep (not including connectors).  21-1/2” wide x 8” high x 21” deep (boxed).
- Weight:  22 lbs (unboxed), 30 lbs (boxed).

Product Description

Emotiva BasX A1 monoblock power amplifier is an excellent addition to the Emotiva range and a fantastic value mono power amplifier.

BasX A1 can deliver 200 Watts into 8 Ohms and 325 watts into 4 Ohms. The distortion is only 0.02%, and the signal-to-noise ratio is 112dB. There is a heavy duty linear power supply with a toroidal Transformer. This powers a high-power class A/B amplifier module. With this much power, the outputs feature transparent fault protection. The unit can also be switched on remotely via the trigger input.

The BasX A1 can be doubled up in a stereo set-up and combined with any preamplifier or streamer with pre – or can be used in a multi-channel AV setup and combined with AV processor or AV receiver with pre out. It features five way speaker terminals that can take 4mm plugs, spade connectors or bare wire. Finally, the X1 assures absolute channel separation and gives audiophile performance at a great price. The sleek minimalist look allows for easy unobtrusive placement as well as stacking.

Audiophile sound quality

BasX A1 is designed to be stable in all situations. The main design aim was sound quality and this amplifier sounds great with all types of music. The quality Class A/B output delivers smooth, detailed sound with natural imaging, and no no harshness or strain. The input stages have a low noise, wide bandwidth design, that pulls out all of the detail from high definition sources. Finally, the Monoblock design completely isolates all of the channels

Quality construction

The power supply features an oversized toroidal transformer that can deliver enough current to drive even difficult speakers. The construction is designed to last, and only top quality audiophile parts are used. The heavy steel chassis and milled aluminium faceplate will ensure the amplifier lasts for many years. Notably, the Double sided FR4 circuit boards have optimised signal paths and are plated through holes. This minimises the need for point-to-point wiring.

Good connectivity

The unbalanced RCA connection allows the unit to be connected to any preamplifier. A set of BasX A1’s can also be connected to the line level outputs of an AV receiver. For example the centre dialogue or surround channels. The trigger input allows the AV receiver to switch all the amplifiers on remotely, at the same time. Moreover, the output terminals are high-grade and can take any kind of connector or just bare wires. With so much power you also need a good protection system for your speakers. The BasX A1 has protection that is instant but completely transparent to the end user.

Why monoblocks?

There are several reasons why monoblock amplifiers are a good idea. One is that monoblock amplifiers can be placed close to the speaker in use, so that lead lengths are kept short. There is also the idea of fault tolerance. If one amplifier fails, you are only down one channel, not three or four. They also tend to be smaller than multichannel amps, as well as easier to carry. Next is channel separation, you cannot get more channel separation than a monoblock amp. Finally, with constantly changing surround sound formats, monoblocs make it easy to add another channel or two.

Write Your Own Review

Write a Review

  • 1 star 2 stars 3 stars 4 stars 5 stars
    1 Star 2 Star 3 Star 4 Star 5 Star

 
 
 
 
 

Contact Details

Customer Services Landline
0121 224 7350/7351

Sales Landline
0121 224 7300/7401

Sales WhatsApp
07706 203859

As Featured/Seen In

The Telegraph
Gadget Show
BBC Midlands Today
Birmingham Mail
Hi-Fi Choice Magazine

Mobile Site

Copyright © Audio Affair (Alexander Michael LTD) 2006-2024. Vat No. 913183835. All rights reserved.