Features
| Frequency Response | 38000Hz - 34000Hz |
|---|---|
| Removable Grill | Yes |
| Impedance | 4Ohms |
| Warranty length | 5 Years |
| Brand | Dali Speakers |
Tech Specs
Type
Enclosure Type: Bass Reflex
Bass Reflex Tuning: 33.5Hz
Connection(s): Bi-Wire
Recommended Placement: Floor
Distance From Wall: 20 - 180cm
Perfomance
Freq Range (+/-3 dB): 38-34.000Hz
Sensitivity (2,83 V/1m): 90.5dB
Nominal Impedance: 4Ω
Maximum SPL: 112dB
Recommended Amp: 40 - 250W
Crossover: 500/800/2.500/14.000Hz
Crossover Principle: 2½ +½ +½ way
Drivers
HF Drive: 1 x 17 x 45 mm Ribbon
High Frequency Driver: 1 x 29 mm
HF Diaphragm: Soft Textile Dome
Low Frequency Driver: 3 x 6½"
Woofer: Wood Fibre Cone
Accessories
Set up: Manual, Micro Fibre Cloth
Isolation: Rubber Bumpers, Spikes M6
General
Dimensions (HWD): 1100 x 220 x 445mm
Weight: 27.3 Kg
Product Description
The floor standing flagship of the RUBICON series, the RUBICON 8, will provide you with a mind blowing large soundstage and an impressive deep, physical bass. The RUBICON 8 has no less than three drivers that all kick in at different frequencies.
This setup ads up to what in effect is a 2½+½+½-way construction, and generates an amazing range and impressive sound pressure. The RUBICON 8 is for those seeking the extraordinary in size and sound.
Drivers
Assembled in-house, every driver in each of the RUBCION models are configured to match the model they are destined for. The three 6½ inch drivers used in RUBICON 8 all work together to reproduce a clean, detailed sound with no colouration. The RUBICON series draws upon the heritage from the SMC based ‘Linear Drive System, which was introduced with the EPICON series.
With the use of the technology from the SMC drivers, we have taken a step closer to remove a very large part of the unwanted distortion. The bass drivers are optimized for long excursion, and the midrange driver for a large useful frequency range insuring that the roll-off is handled in the crossover and not in the driver. All this ensures that the benefit from SMC can be enjoyed by even more Hi-Fi lovers around the world.
Tweeters
In the RUBICON series, DALI makes use of both the soft dome tweeter working alone, and the hybrid tweeter configuration an amazing rendering of the high frequencies. The voice coil used in the RUBICON series is designed to be very light and agile in order to achieve a broader bandwidth. This lighter voice coil is placed inside a powerful ferrite magnet that keeps a tight control of its movements.
The ribbon tweeter is the master of wide dispersion and combining it with the soft dome, the tweeter module starts working as low as 2.5 KHz. This extreme bandwidth combined with the ultra wide dispersion is an important part of the DALI sound philosophy.
Cabinet
The gracefully elegant exterior of the RUBICON works as the base for the low-loss drivers. In every cabinet, the mid-range and bass drivers are separated into their own chambers. Turbulence is minimized through a bass reflex port, which is placed directly behind every woofer, and the timing between the woofer and the bass port is thereby also optimized.
