Product Video
Features
Warranty length | 2 Years |
---|---|
Brand | Audio Technica |
Tech Specs
Turntable
- Type: Fully Automatic, Belt-Drive
- Motor: DC motor
- Speeds: 33-1/3 RPM, 45 RPM
- Platter: Die-cast aluminium
- Wow/Flutter: <0.2% WRMS (33⅓) @3kHz
- Signal-to-Noise Ratio: > 60 dB
- MM Out: 3.5mV nominal @1kHz, 5cm/sec
- MC Out: 220mV nominal @1kHz, 5cm/sec
- Phono Gain: 36dB nominal, RIAA
- Power Requires: 220-240V/50, 60Hz
- Power Consumption: 2W
- Dimensions (WDH): 435 × 353 × 128mm
- Weight: 5.2kg
Cartridge & Stylus
- Model: AT91R
- Type: VM Dual Magnet
- Output: 3.5mV (1kHz, 5cm/sec)
- Vertical Track: 1.5-2.5g (stnd 2g)
- Stylus Build: 0.6ml bonded conical
- Cantilever: Aluminium pipe
- Recmnd load impedance: 47000Ω
- Weight: 5.0g
Headshell
- Model: AT-HS3
- Weight: 11.1g
- Overhang Adjustment: 8mm
Tonearm
- Type: Static balanced straight
- Effective Length: 221.5mm
- Overhang: 19mm
- Max Tracking Error: Less than 3°
- Stylus Pressure Range: 1-4g
- Cartridge Weight: 14.5 - 20g
- Anti-skating Range: 0-3g
Accessories
- Rubber mat
- Dust cover
- Platter (+ drive belt)
- Counterweight
- AT-HS3 Headshell
- AT91R VM cartridge
- 45 RPM adapter
- Power cable
Product Description
Audio Technica AT-LP3 is a revolution in automation, it blends outstanding analogue sound with advanced features unique to a fully automatic belt-drive turntable. Play vinyl records at 33⅓ or 45 RPM using the pre-fitted AT91R dual MM phono cartridge whilst a detachable universal headshell and variable cartridge mode.
MM / MC Cartridge
A distinctive feature that is not usually included in turntables with integrated phono preamplifiers, MM/MC switch mode allows vinyl lovers to experiment with both Moving Magnet and Moving Coil cartridges on the Audio Technica LP3, permitting better sonic customisation.
AT91R Dual MM
Custom built for the Audio Technica LP3, the AT91R phono cartridge incorporating a Dual Moving Magnet design houses an aluminium cantilever for greater rigidity and retrieval of elusive details.
Universal Headshell
Suitable for half-inch mount cartridges and four-pin tonearms, the detachable universal AT-HS3 headshell lets users upgrade their cartridge to augment their sound.
Balanced Tonearm
Equipped with a lift that is hydraulically-damped and has a lockable rest, the LP3’s straight level tonearm has radial ball and pivot bearings for horizontal and vertical movements respectively.
4.5mm Platter Mat
Preventing undesired vibration and for secure play, LP3 includes a 4.5mm thick rubber platter mat.
Key Features
- Completely automatic belt-drive turntable function with dual speed: 33-1/3, 45 RPM
- Stable straight tonearm with lift control that is hydraulically-damped and lockable rest
- Built-in switchable phono/line preamplifier with linked dual RCA output cable
- Moving magnet and moving coil switchable modes for phono cartridges
- Dual MM type AT91R phono cartridge and universal AT-HS3 headshell
- Resonance-resistant aluminium platter formed by die-casting with 4.5mm rubber mat
- Damped base build for decreased low-frequency feedback saturation