|Warranty length||3 Years|
- Size 1 - 43x30cm (17×12”)
- Size 2 - 48x35cm (19×14”)
- Size 3 - 52x40cm (20.5×16”)
Townshend Seismic Vibration Isolation Platform includes a durable slim steel top plate that integrates unobtrusively under any hi-fi component.
Especially designed to isolate individual components such as CD players, turntables, DACs, preamplifiers, power amplifiers and streamers from vibration. The acoustically dead constrained-layer damped plate combined with a Seismic Load Cell™ attached to each corner is the ultimate combination to absorb and isolate unwanted vibration, including structural, air-borne and that generated by the hi-fi equipment.
Ultra Thin Platform
The Platform can be levelled by turning the adjustable Seismic Load Cell. For asymmetric components such as a valve (tube) amplifier with the transformers at the rear, different load capability Seismic Load Cells can be used to balance the load.
The singular Seismic Load Cell is available with seven different weight capacities, ranging progressively from 1kg up to 32kg. Virtually any weight of equipment can be isolated. For out of balance loads where the centre of gravity of the component is not near the geometrical centre of the component, each support foot is screw adjustable in length to allow for this. If the degree of out of balance is too large, then it is suggested to use unequal springs.
- Delivers wider and deeper soundstages
- Improves bass definition
- Reduced muddiness and smear
- Makes transients clearer