|Warranty length||5 Years|
|Recommended amplifier power||30 - 180 Watts|
|Continuous power handling||110 Watts RMS|
|Frequency response||34Hz - 25kHz -6dB|
|Sensitivity||93dB (2.83 Volts @ 1 metre)|
|Nominal impedance||8 Ohms|
|Dual Concentric™ high frequency||33mm (1.30") aluminium alloy dome with Tulip Waveguide™|
|Dual Concentric™ low frequency||250mm (10.00") treated paper pulp cone with HE twin roll fabric surround. 52mm (2.00”) edge wound voice coil|
|Dispersion||90 degrees conical|
|Type||Bi-wired, hard wired passive, low loss 2nd order compensated LF, 1st order HF|
|Adjustment||+/- 3dB over 1.3kHz to 25kHz shelving|
|Enclosure type||Distributed Port|
|Volume||100L (3.5 cu.ft)|
|Dimensions||950 x 456 x 336mm
(37.50 x 18.00 x 13.25”)
|Weight||30kg (66 lbs)|
|Finish||Walnut veneer with solid walnut edging and trim detail|
|Warranty||5 years standard parts (1 year electrical parts)|
Tannoy Turnberry GR floorstanding speakers are beautiful and undoubtedly a timeless classic; one which uses cutting edge technology in its 10” Dual Concentric drive unit and the finest crossover components to create a thrillingly dynamic and realistic performance. This is delivered with consummate ease from cabinets that stand just under a metre high, both beautifully finished in walnut.
All components and cabinets are still hand assembled in the time-honoured fashion to ensure that attention to detail and unique styling go hand in hand in maintaining the exclusive appeal of this highly respected and sought after loudspeaker.
The design comfortably complements any decor from ancient castle through to the cool, casual and contemporary. The only rules Tannoy absolutely adhere to when designing and crafting Prestige loudspeakers is to utilise the most up to date, no compromise, acoustic technologies and time-proven cabinet making skills ensuring these are probably the very best sounding loudspeakers you will find anywhere.
Hard-wired crossovers are used throughout the Turnberry SE and the routing of each cable has been painstakingly considered to ensure there is no degradation in sound quality. Similarly, the components have been carefully arranged to avoid any coupling effects. In particular, incredible transparency in the mid band has been achieved providing an enhanced true-to-life vocal clarity.
Completely redesigned crossovers, incorporating the most up-to-date high quality components, have taken these models to a new level of acoustic excellence. ICW Clarity Caps have been included for high frequency (HF) section of the crossovers, while high quality metalised film capacitors are used in LF sections. The LF crossover also makes use of very low loss laminated iron core inductors.
Internal connections from input terminals to crossover, internal crossover wiring and crossover to Dual Concentric drive unit are made with the exceptional VDH MC CS18 halogen free silver-plated cable.
A 5-point terminal panel (bi-wire and ground point) gold plated terminals has been incorporated on the Turnberry SE. With the driver chassis grounded via the 5th terminal, and by using appropriate speaker cable, this proven technology, developed on earlier Prestige models, minimises the effects of RF interference resulting in a more transparent midrange.