|Warranty length||5 Years|
Compatible Amp: 30-150 Watts
Cont power handling: 95W RMS
Freq response: 39Hz-25kHz (-6dB)
Sensitivity: 91dB (2.83V @1m)
Nominal impedance: 8 Ohms
Type: Dual Concentric
HF: 25mm (1") aluminium alloy dome
HF Waveguide: Tulip WaveGuide
LF: 250mm (10") treated paper pulp cone
Voice Coil: 42mm edge wound
Surround: HE twin roll fabric surround
Dispersion: 90 degrees conical
Type: Bi-wired, hard wired passive
LF: low loss compensated 2nd order
HF: 2nd order high frequency
Shelving Adj: +/-3dB (1.8kHz-25kHz)
Enclosure: Distributed port
Finish: Lacquered mahogany veneer
Detail: Solid walnut edging and trim
Volume: 85L (3 cubic ft)
Dimensions (HWD): 850 x 397 x 368mm
Weight: 23kg (50.7 lbs)
Tannoy Prestige Stirling GR compact floorstanding speakers employ a 10" Dual Concentric driver with a cabinet optimised for superb bass control and extension, allied to spacious, fluid mid-range and high frequencies of great purity and detail.
The cohesion of the stereo sound staging reproduced by the Stirling, a characteristic common to all the Dual Concentric equipped Prestige models, is involving and believable, delivering remarkable spaciousness and presentational stability in equal measure.
During the manufacturing and development of the Prestige series, Tannoy had only one absolute rule: To use only the most up to date, no compromise, acoustic technologies and tried-and-tested cabinet building skills to ensure the entire range surpassed the standard of the very best loudspeakers currently on the market.
As such, each component and cabinet are still hand assembled to ensure that attention to detail and unique styling work together to maintain the exclusive appeal of the highly respected and sought after Prestige Stirling loudspeaker.
To optimise acoustic performance only components of the highest possible standard have been used. Hard-wired crossovers are used throughout the Stirling GR and the routing of each cable has been painstakingly considered to ensure there is no degradation in sound quality.
Similarly, the components have been carefully arranged to avoid any coupling effects. In particular, incredible transparency in the mid band has been achieved providing an enhanced true-to-life vocal clarity.
Completely redesigned crossovers, incorporating the most up-to-date high-quality components, have taken these models to a new level of acoustic excellence. ICW Clarity Caps have been included for high frequency (HF) section of the crossovers, while high quality metalised film capacitors are used in LF sections.
The LF crossover also makes use of very low loss laminated iron core inductors. Internal connections from input terminals to crossover, internal crossover wiring and crossover to Dual Concentric drive unit are made with the exceptional VDH MC CS18 halogen free silver-plated cable.
A 5-point terminal panel (bi-wire and ground point) gold plated terminals has been incorporated on the Stirling GR. With the driver chassis grounded via the 5th terminal, and by using appropriate speaker cable, this proven technology, developed on earlier Prestige models, minimises the effects of RF interference resulting in a more transparent midrange.