Features
| Warranty length | 10 Years |
|---|---|
| Brand | Tannoy Speakers |
Tech Specs
Enclosure
Type: In-wall loudspeaker
Freq Response: 75Hz-51kHz (-3dB)
Low Freq Alignment: 36Hz (-6dB)
Compatible Amp: 20-180W @8Ω
Power: 90/180/360W (Avg/Prg/Peak)
Sensitivity (2.38V @1m): 91/94dB
SPL @1m: (Avg/Peak) 110/116dB
Impedance: 8Ω
Drivers
Dispersion: 90 degrees
SuperTweeter: 1” titanium dome
Dual Concentric: 25mm titanium dome
Bass Driver: 165mm (6.5")
Crossover Frequency: 1.8kHz, 16kHz
Crossover Type: Passive
General
Connector: Gold plated spring terminal
Front Baffle (H x W): 320 x 209mm
Maximum wall thickness: 25mm (1.00”)
Cut-out (H x W) 271.5 x 168.5mm
In-wall Mounting: 20l (0.7 cu ft)
Mounting Depth: 98.9mm (3.89”)
Weight: 3kg (6lbs 6oz)
Accessories
- Pre-installation ring
- Back can
- Optional 60W transformer
Product Description
Tannoy IW 6TDC In-Wall Speaker (Single) uses a dual concentric with bespoke cone material chosen for linear response and wide dynamic range set within the proven IW series ABS chassis along with a 25mm (1") titanium dome tweeter.
SuperTweeter
The SuperTweeter is derived straight from Tannoy’s high-end hi-fi designs, and is built on a second high-efficiency 25mm (1") titanium dome HF unit. Robustly built and capable of withstanding long term high volume playback, the iW 6TDC can handle 180 Watt programme material and 360 Watt peaks.
High Efficiency
With its high-efficiency design (91 dB/Watt) this gives an average maximum SPL of 110dB and the capability to produce 116dB. The IW 6 TDC is fitted with a front mounted HF energy switch allowing fine tuning of the HF output by +/-1.5 dB
Installation
The design not only improves the dynamic and energy of the sound but reduces the number of in-wall speakers required for larger room installations.
