|Warranty length||2 Years|
Out volt @1kHz: 0.18 mV 5cm/sec
Channel balance @1kHz: 1.5 dB
Separation at 1 kHz: 20 dB
Separation at 15 kHz: 10 dB
Freq response: 20Hz-25kHz (±3dB)
Tracking ability at 315Hz: 65 µm
Compliance/dynamic/lateral: 10 µm/mN
Stylus type: Eliptical
Stylus tip: R18µm / r/R 8/18 µm
Track force range: 3-5.0 g (30-50mN)
Tracking force: 4.0 g (40 mN)
Tracking angle: 20°
Internal impedance, DC resistance: 2 ohm
Recommended load impedance: > 10 ohm
Body: Ground wood and resin composite
Coilwire: High Purity Copper (OFC)
Cartridge weight: 30 g
Ortofon new SPU #1 models are perfect all-rounders for the newcomers to the world of SPU.
The SPU #1 E has an Elliptical stylus providing more detailed sound reproduction and expansive imaging. It is made from high purity copper armature windings and terminal leads with ground wood and resin composite housing.
These SPU cartridges models have excellent price-to-performance ratio and are perfect all-rounders for the newcomers to the world of SPU.
The SPU #1 models, with their universal connector, ensure the ability to mount the units in a wider range of tonearms with universal (SME) mount, e.g. Ortofon TA-110 and TA-210 tonearms. The combination of SPU #1, ST-7 Moving Coil transformer and TA-110/TA-210 tonearms gives a supreme experience.
With their linearity and full bodies, the SPU #1 models are a perfect solution for the playback of stereo recordings. Sonically, the SPU #1 models are genuine SPUs, known for their full-bodied and powerful music image, minimum of intermodulation distortion and an impressive channel separation.