|Warranty length||2 years standard (5 years on registration)|
Analog: 1 x DIN (optional RCA)
Input Impedance: 50kΩ
Analog: 1/4” headphone jack
Line Out: Max 3.7Vrms into 2kΩ
Freq Resp: -3dB at 10Hz & 72kHz
Power Out: 560mW/ch, 8Ω
Supply: NAPSC, FlatCap XS, HiCap, SuperCap
Dimensions (HWD): 57 x 121 x 187mm
Notes: Suitable for headphones 8Ω to 2KΩ.
Power supplies other than a PSC require a Slic lead
Front: Bead blasted and black anodised
Case: Black powder coated
Naim HeadLine headphone amp is designed to offer optimum performance from a variety of high impedance headphones and is a perfect choice for headphones like the Sennheiser HD650, Sennheiser HD700, Sennheiser HD800, Grado PS500, Grado GS1000i and similar hi-fi headphones.
Fitted with a captive lead, the HeadLine takes its signal from the tape socket of any of Naim's preamplifiers, except the NAC 152 XS. It has its own volume control and is designed to be very, very quiet. It has the ability to drive most headphones to an adequate level (i.e. loud) with low distortion.
Headphones tend to be highly revealing of both noise and distortion, so we have expended a great deal of effort getting these parameters to extremely low levels. The HeadLine needs to be used with an external power supply such as the NAPSC. If using a FlatCap XS, HiCap or SuperCap you will also need a special interconnect; the SLIC.
We are here to help find the right system for you. As a suggested starting point, you may want to consider partnering the HeadLine with the following:
- NAIT 5i
- NAIT 5i
- NAIT XS
- NAC 152 XS
- NAC 202
- NAC 282
- NAC 252
- NAC 552 Upgrade Paths
- FlatCap XS