|Warranty length||2 Years|
The IsoAcoustics ISO-L8R130 speaker stand is designed to be fully peg adjustable for use at home or in the studio and fine-tunes your sound the way it's meant to be heard. The stylised design allows speaker to float in free space for tighter bass, better imaging and uncoloured sound.
Two lengths of tubing and two sets of end-plug pairs provide 14 height configurations which can be used to tilt the speaker up and down. The stand can be assembled and reconfigured repeatedly to establish the ideal position off the supporting surface and focused towards the listener. The tube lengths and end-caps combinations provide a simple means to establish optimal adjustment of large and small monitors over the typical 36" to 48" listening distance for mixing and evaluation.
ISO-L8R Stand Line-Up
IsoAcoustics offers three sizes of audio stand to fit your speakers. Each size is optimized to get the most from your particular speaker system. Stands can be configured to 3" or 8" in height, with inserts that provide a variety of tilt-up and tilt-down adjustments.
In the lowest configuration, the monitor can be tilted down to focus the tweeter to a height below the original supporting surface providing superior isolation and sound improvement. ISO-L8R130 short speaker stand is configured for 3" in height. The speaker can also be tilted for optimal listening angle. Usually speakers will be situated on a desktop or table. ISO-L8R130 long speaker stand is configured for 8" in height. This is also tilt adjustable and can also be used for floor applications.
If you're not sure which IsoAcoustics stand to choose for your speakers, click here to go through IsoAcoustics stand finder which includes several speaker models. If your model isnt included, select the closest model then click here to select the right stand from IsoAcoustic full range.