|Warranty length||1 Year|
Frequency Response: 20Hz-20kHz±3dB
Channel Balance: 2dB @ 1kHz
Channel Separation: 25dB @ 1kHz
Sensitivity: 6.5mV±1.5dB, 1kHz @ 5 cm/sec
Static Compliance: 24mm/N lat., 16mm/N vert
Equivalent tip mass: 0.45 mg
Vertical Tracking Angle: 24°
Radius: 1012GX Gyger II
Stylus Type: Replaceable
Load Resistance: 47,000 Ohm
Load Capacitance: 150-200pF
Internal Inductance: 570 mH
Internal Resistance: 660 Ohm
Cartridge Weight: 6.3g
Fixing Centre: 0.5” (12.7mm)
Tracking Weight: 1.5-2.0g (1.7g nom.)
The Goldring 1012GX uses an acclaimed Gyger-2 diamond stylus, a type which gives smooth extended high frequencies, low distortion and reproduces a highly detailed and dynamic sound. Advanced diamond tip polishing ensures excellent tracking ability, reduces record wear and offers a better sound than the Goldring 1006.
The Goldring 1012GX phono cartridge represents outstanding value for money and has become one of Goldring's most popular cartridges.
This cartridge is moving magnet (MM) which can be used with most "phono" or "turntable" inputs on your hi-fi amplifier. If you do not have a "phono" or "turntable" input, you will need a phono stage inbetween your amplifier and turntable. A phono stage boosts the lower signal from this cartridge for use with a standard input on your amplifier. View our range of phono stages or call us if you need advice.
- 5 star Award Winner (Hi-Fi World magazine)
A spectacular sounding cartridge at the price, with immensely powerful bass that runs deep, sounds firm and delivers a real punch to the chest...shows just how good LP can be on a modest budget (Hi-Fi World magazine)