|Warranty length||5 Years|
Power Handling: 80W unclipped
Freq Range: 80Hz-30kHz (±3dB)
Impedance: 4 Ohm nominal
Sensitivity: 87dB / 2.83V@1m
Tweeter: 25mm soft dome
Driver: x1 101mm midbass
Cone: polypropylene cone.
Internal wiring: 18 AWG stranded OFC
Finish: White or Black
Grille: Snap on-grille.
Dimensions (WDH): 140 x 190 x 250mm
Weight: 9 kg packed pair
Opening a new realm of possibility, the Epos K5i 2-way stand-mount loudspeaker exceeds expectations of such a small unit as it's capable of delivering a wide soundstage and detailed bass.
A wonderful AV satellite speaker or desktop companion; this is an updated model of the original K5.
High-Velocity Slot Ports
Including a variety of unique features that enables it to achieve its design goal, these features include stylish looks, High-Velocity Slot Ports, rear mounted drivers, detachable rear baffles and upgradability to fully powered active mode. The K5i incorporates new technologies developed for greater performance than previous models.
High-Velocity Slot Ports are implemented to give dramatic improvements over conventional cylinder ports. Achieving lower audible distortion, it has lower intrinsic drag and reduced turbulent airflow within the port. HVSP can also lower air loading to the mid and bass drivers helping to keep them operating in a more linear region throughout their excursion range.
Front Firing Port
Unlike previous models, the port is located on the cabinet's front baffle and the front firing port offers more flexibility with room placement. They can be placed closer to a wall, without restricting operation.
The smart clamping mechanism secures the drivers for an even distribution of tension applied to the surface of the basket. The pressure helps reduce unwanted vibrations that normally result in higher levels of distortion. The end result is a beautifully clear and transparent mid-range quality.
Not only are the Epos K5i cabinets carefully braced internally, they are developed with removable rear baffles for reducing cabinet colouration and unwanted resonance. It also facilitates ‘Active-K’, a novel feature allowing you to upgrade your loudspeaker from passive to active operation.
The high-quality crossover components include a selection of very high-grade polypropylene capacitors and metal oxide resistors. As standard, the Epos K5i comes pre-wired with multi-stranded OFC cable.
Specially designed cable management holes inside the cabinet and high current connectors allow for aftermarket replacement cable sets to be installed if required.