|Frequency Response||28Hz - 30kHz|
|Warranty length||5 Years|
Design: 3 way, floor standing, reflex port loaded, with user adjustable crossover.
Power Handling: 500 W max. Speech and Music.
Frequency Range: 28 Hz - 30 kHz. -6dB
Impedance: 4 Ohm nominal.
Sensitivity: 89dB @ 2.83V/1m
Amplifier Compatibility: 50 - 600 Watts.
Finish: Cherry real wood veneer
Woofers: 2 x 220mm diameter on an aluminium chassis, 38.5mm voice coil with +/- 8mm excursion Light weight, Kevlar/carbon fibre/pulp cone piston material, with inverted dust cap.
Mid-range: 1 x 158mm with 25mm voice coil and +/- 3.5mm excursion, Light weight, Kevlar/carbon fibre/pulp cone piston material, with inverted dust cap
Tweeter: 1 x 25mm metal dome, Ferro-fluid cooled and custom Epos suspension. Ferrite magnet system
Crossover: 250 Hz and 3.5 kHz. High-grade, glass fibre PCB’s with 2 ounce copper tracks.
Gold plated 4mm plugs and sockets for user configuration.
Separate PCB for Bass filter to isolate it inductively from Mid-range and tweeter filters.
Optional Passive or Active configuration: Active operation requires a separate custom crossover (call for details)
Size (mm): 265W x 385D x 1230D
Size Plinth (mm): 410W x 540D
Weight (kg): 45 each
Epos Encore 50 speakers (available on 0% finance) sound so impressive there is no substitute for the pure musical involvement and enjoyment experienced from these stylishly designed towers of sound. After three years in development, one listen and you'll know it was time very well spent!
Each and every part of the Epos Encore 50 has been developed by Epos engineers to a standard not previously achieved by the company. From the original design concept through to the cabinet construction, speaker drive units, crossover and final voicing, the Encore 50 stands superior in every way.
The Cabinets are designed from hand selected, book-matched real wood veneer, chosen to give the most luxurious finish on an Epos speaker so far. This is based over an MDF structure which offers excellent rigidity.
Each speaker weighs in at 50kg and is supported by a custom made plinth which extends their footprint and decouples mechanical vibrations from the cabinet. This makes the speaker more stable and improves low frequency (bass) performance. This is finished off with fully adjustable turned aluminium and steel spiked feet allowing you to level each speaker perfectly.
Hugh Quality Drivers
The Drivers used in the Encore 50 were chosen after hours of listening. Two 220 mm woofers and a 158 mm mid-range are made from a Kevlar/carbon fibre/pulp mixture to combine high rigidity, with good inherent damping and feature concave dust caps coupled tightly to the cone. Frequency responses of both woofer and mid-range are inherently very smooth.
The tweeter is a specially developed version of the Epos Mi tweeter, with anodised aluminium dome, Kapton voice coil former, braided lead-out wires and Ferro-Fluid damping. Together, these drivers produce a well matched, balanced performance with an uncanny ability to create a realistic musical soundstage.
The crossover design of the Epos Encore 50 is revolutionary. It allows the user unparalleled flexibility to compensate for individual room acoustics, without compromising sound quality. The tonal balance of the speaker may be easily changed by the user to increase or decrease the tweeter and midrange output in 1.5dB steps, via an aperture in the bottom of the speaker and plinth.
The crossover PCB’s are designed to be completely, or partially, by-passed, to enable the user to configure the speaker in passive or active mode. Epos, will offer a custom DAC with programmable digital crossover to suit any make of amplification system. In short, it has unparalleled flexibility.