|Warranty length||5 Years|
Enclosure Type: Bass Reflex
Recommended Placement: Floor
Distance From Wall: 30 - 150cm
Freq Range (+/-3dB): 38 - 32,000Hz
Sensitivity: (2,83 V/1 m) 88.0dB
Nominal Impedance: 4Ω
Maximum SPL: 112 dB
Recommend Amp Power: 40 - 300W
Crossover Principle: 3+½ way
Super HF drive Qty: 1 x 17 x 45mm
Super HF Diaphragm: Ribbon
HF Driver: 1x28mm Soft Textile Dome
MF Driver: 1x6.5" Wood fibre cone
LF Driver: 2 x 8" Wood Fibre Cone
Bass Reflex Tuning: 29.5Hz
Connection input(s): Bi-Wiring
Dimensions (HWD): 1140 x 241 x 450mm
Weight: 34.8 Kg
The Dali Opticon 8 is the pinnacle of the Opticon series and takes the form of a towering floorstander endowed with Dali's best cutting-edge technology. Featuring the same gold-plated bi-wiring terminals as the rest of the range, the Opticion 8 is a mix of deep bass coupled with mid and high-range perfection.
The mounting of the drivers and the final tests and approvals on each and every speaker is also handled directly at our own assembly lines in our Danish factory. Just under 90cm in height, the physical presence of the OPTICON 8 hardly dominates a room, but the almighty sound it is capable of emitting will demand every last iota of attention from the listeners inside it.
All elements of the DALI drivers are designed, produced and manufactored in-house in DALI. With a capacious cabinet, 2 x 8 inch low-loss Wood Fibre Woofers to render the deep bass joined by a 6½ inch low-loss Wood Fibre Woofer to handle the mid-range and our trademark Hybrid Tweeter with a Soft Dome and Ribbon Tweeter, the OPTICON 8 is capable of filling even the largest rooms with utterly immersive audio.
DALI MDF CABINETS
Keeping the manufacturing of the OPTICON series firmly in the hands of DALI we utilize our large and efficient woodworking facility in Denmark to handle everything from cutting out the Medium Density Fibre board (MDF) cabinet to applying the vinyl.
Dali Opticon is essentially a replacement for the older Dali Ikon range, building on Dali's success with the higher end Rubicon and Epicon speakers, bringing their experience with these higher end speakers into this stunning Opticon range while offering incredible value for money and a significant upgrade over the Dali Zensor range.
In the OPTICON woofer magnet motor system the pole piece is purely constructed of SMC. SMC’s unique ability to deliver a high magnetic conductivity and a very low electrical conductivity delivers all the wanted qualities of a really good speaker magnet without the traditional downsides.
This impressive 3 + ½-way system leaves nothing out and delivers a punchy bass, refined mid-range and high-definition high frequencies. Enhancing the quality of any source and putting in a performance that will eke out even the subtlest sounds of the recording.