|Warranty length||5 Years|
Enclosure Type: Bass Reflex
Recommended Placement: Floor
Distance From Wall: 20 - 100cm
Freq Range (+/-3dB): 49 - 32,000Hz
Sensitivity: (2,83 V/1 m) 89.0dB
Nominal Impedance: 4Ω
Maximum SPL: 110 dB
Recommend Amp Power: 25 - 200W
Crossover Principle: 2+½ way
Super HF drive Qty: 1 x 17 x 45mm
Super HF Diaphragm: Ribbon
HF Driver: 1x28mm Soft Textile Dome
LF Driver: 2 x 6 ½" Wood Fibre Cone
Bass Reflex Tuning: 42Hz
Connection input(s): Bi-Wiring
Dimensions (HWD): 1000 x 195 x 330mm
Weight: 18.9 Kg
Standing a metre high and capable of seriously sonorous sounds, the Dali Opticon 6 is a master of music that delivers thunderous bass and perfectly pitched mids and highs in unequalled equilibrium. Its high sensitivity and even impedance load together with its impressive ability to reproduce undistorted audio makes the OPTICON 6 the perfect balance between size and performance. Add in gold-plated bi-wiring terminals, and the OPTICON 6 is the sender of soul-moving music to the ears of those that demand more.
The mounting of the drivers and the final tests and approvals on each and every speaker is also handled directly at our own assembly lines in our Danish factory. The physical presence of the OPTICON 6 does not dominate a room, but the sound it is capable of emitting will demand every last iota of attention from the listeners inside it.
All elements of the DALI drivers are designed, produced and manufactored in-house in DALI. The front baffle on the Opticon 6 form a rigid base for the drivers, which are screw-mounted directly into the 25 mm thick MDF. To ensure the best possible hold on the woofer and thereby integration with the cabinet, the 5 screw holes are placed along the arms of the woofer chassis. The tweeter module is held securely in place with 6 screws to eliminate vibrations and resonance. A rubber gasket is placed between the woofer and the milled out rim to ensure a 100% airtight fixture.
DALI MDF CABINETS
Keeping the manufacturing of the OPTICON series firmly in the hands of DALI we utilize our large and efficient woodworking facility in Denmark to handle everything from cutting out the Medium Density Fibre board (MDF) cabinet to applying the vinyl.
In the OPTICON woofer magnet motor system the pole piece is purely constructed of SMC. SMC’s unique ability to deliver a high magnetic conductivity and a very low electrical conductivity delivers all the wanted qualities of a really good speaker magnet without the traditional downsides.
Opticon 6 has all the virtues of the OPTICON 5 with the added power of an extra 6½ inch woofer. The featured twin 6½ inch low-loss Wood Fibre Woofers complete with our unique SMC magnet motor system, assisted by our combined Soft Dome and Ribbon Tweeter module, delivers audio with wow-factor. Combined with the extended internal cabinet volume, the OPTICON 6 reaches lower into the deep bass producing an even more impressive broader soundstage.
Dali Opticon is essentially a replacement for the older Dali Ikon range, building on Dali's success with the higher end Rubicon and Epicon speakers, bringing their experience with these higher end speakers into this stunning Opticon range while offering incredible value for money and a significant upgrade over the Dali Zensor range.