|Warranty length||2 Years|
- 2-way HiFi Pro, bass reflex
- MDF Wood Cabinet
- 8” HD Type Woofer
- 1” HD silk dome on Waveguide tweeter
- Impedance : 8 Ohm
- RMS Power 8 ohm
- AES Rated : 200 watt
- Music - Program : 300 watt
- Dynamic Peak (low-cut) : 600 watt
- Protection : Auto-Reset 3-step Protection Guard
- SPL 1 watt/1M : 93 dB
- SPL Max peak : 124 dB
- Frequency response: 50 Hz - 25 Khz
- Connector : Speakon / Speakon
- Dispersion : 80° H x 70° V
- IP rating : Indoor use only (IP40)
- Dimensions : 411 x 250 x 250 mm
- Weight : 8.1 Kg
APart Mask 8F speakers are improved versions of the Mask 8 speakers and combine unique, stylish design, a powerful 8" woofer and the ferro-fluid cooled silk dome tweeter. These speakers feature a lower frequency response than the regular Mask 8s and have a unique and very stylish innovative design. The curved fine metal grill together with the shape of the wooden delta cabinet gives MASK8 a different, yet inconspicuous look. The very powerfull 8” coated papercone woofer together with the ferro-fluid cooled silk dome tweeter on a Waveguide horn, results in a high SPL, an ultra low distortion and a sound that comes close to studio monitor quality!
MASK8F loudspeakers can be used as full range loudspeakers, however they are best used in combination with the APart subwoofers SUB-2200 and SUB-2400. Its wide frequency range makes sure every note, starting from the punchy bass over the clean middle range to the crystal clear highs, reaches your ears with an astonishing clarity.
The build-in Auto-Reset 3-step Protection Guard together with the quality components make MASK8 a fail-safe loudspeaker, even at high power loads!
MASK8 is delivered with a metal U-Bracket. After mounting the bracket on the wall, the sleeve in the bracket makes it quite easy and safe to fix the MASK8 loudspeakers, even in uncomfortable positions. The MASK8 cabinet has several thread mounting points tapped at the back, the top and side of the cabinet. This way the cabinet can be rigged or mounting clamps can be used. An extra contractor advantage! MASK8-BL also has a pole mount adapter in its bottom. This adapter makes it possible to mount the speaker on top of a standard 35mm pole such as the APart STFLOOR, STSUB and STT. Please note this feature is not available on MASK8-W.